Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe

Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe Featured Image
  • Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe
  • Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe
  • Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe
  • Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe
  • Manufacturing Yellow and Black Color PE 80 Grade High Density Polyethylene HDPE Jacket Pipe

Short Description:

Application of PE water supply pipe
HDPE pipes can be used for general purpose pressure water conveyors as well as for drinking water conveyors.
There are municipal buried water supply, construction to (drainage) water, farmland irrigation, waterscape projects. In the water supply pipeline project, PE water supply pipe will eventually replace UPVC pipe.


Product Detail

Product Tags

Basic Info.

Product Description

Product Name PE100 Water Supply HDPE Pipe
Color Black with bule line
Standard GB/T13663-2000,ISO 4427-1:2007
Specification 20-1200mm
Pressure 0.6MPa SDR26,0.8MPa SDR21,1MPa SDR17,1.25MPa SDR 13.6,1.6MPa SDR 11
Main application Water Supplying and Draining
Guarantee More than 50 years

 

Features

1. High toughness and good seismic performance;
2. The connection is reliable;
3. Low density, light weight, easy to handle and install
4. Can resist a variety of chemical media corrosion;
5. Excellent hydraulic performance, the wear resistance coefficient is only 0.009;
6. Long service life, up to 50 years;
7. Good hygiene and environmental performance;
8. Better resistance to slow crack growth (SCG) and rapid crack propagation (RCP).

HDPE pipe introduction

HDPE pipe sizes are from DN32 to DN1200.
The pressure grade is between 0.6mpa and 1.6mpa, with 5 grades.
HDPE pipe in the temperature of 190 ºC n240 ºC between will be melt, using this feature, the pipe (or pipes) a good contact with both parts of the melt,
And maintain the appropriate pressure, after cooling the two can be firmly integrated.
Therefore, the connection mode of PE pipe is different from that of u-pvc pipe. Generally, the two methods are electric hot melt connection and hot melt butt joint. When DN is greater than or equal to 75, hot-melt butt joint or electric melt socket connection is adopted. Connect with different materials using flange or thread connection.

  • Previous:
  • Next:

    • RELATED PRODUCTS